Guide · Homeowners and landlords · 4 min read · Updated 17 November 2026
How to Maintain Timber Windows: Painting, Rot Repair and Care
Short answer
To maintain timber windows, check them every year for cracked paint, soft timber and failed putty, especially at cills and bottom rails. Wash frames, keep drainage paths clear and lubricate hinges and pulleys. Repaint before the paint film fails, typically every few years. Repair small areas of rot promptly with splices or resin, from about £150, and repaint at £100–£250 per window.
An annual check
Once a year, ideally in late spring or early autumn, look closely at each window from inside and out. Focus on the lowest parts, where water collects: cills, bottom rails of sashes and casements, and the joints at the bottom corners. Look for cracked, flaking or blistered paint, gaps where putty has come away from the glass, and dark staining that suggests water is getting into the wood.
Press gently on suspect areas with a screwdriver. Sound timber resists; soft, spongy timber that the blade sinks into is rotten. Note where problems are, take photographs and plan repairs before the next wet season. Small issues caught early are quick and cheap to fix.
- Cracked, flaking or blistered paint.
- Missing or loose glazing putty.
- Soft or spongy timber at cills and bottom rails.
- Open joints at the corners.
- Sashes that stick or cords that are frayed.
Cleaning and minor care
Wash frames with mild soapy water a couple of times a year, rinsing off dirt and algae that hold moisture against the paint. Clear the drip grooves under cills and any drainage paths so water can run off rather than sit against the timber. Wipe condensation from the inside of glass and frames in cold weather, as persistent moisture causes paint to fail inside too.
Lubricate hinges, friction stays and locks on casements, and pulleys on sash windows, with a suitable light lubricant. Do not paint over sash cords or seal sashes shut with paint, which is one of the most common reasons sash windows stop opening.
Check the mastic seal between the window frame and the surrounding brickwork or render. Over time it cracks and pulls away, letting rain run behind the frame and into the wall. Cutting out failed mastic and resealing with a suitable flexible sealant is a small job that protects both the window and the wall.
Repainting
Paint is the main protection for timber windows. The aim is to repaint before the existing paint film fails, so water never reaches bare wood. How often depends on the paint system and exposure: south and west-facing windows and coastal homes need attention more often than sheltered ones. Factory-finished windows usually come with a recommended maintenance interval.
Good preparation matters more than the paint. Remove loose and flaking paint, sand to a sound surface, fill small defects, prime any bare timber and then apply finish coats. Microporous paints allow moisture in the timber to escape, while linseed paints suit traditional joinery. Professional repainting typically costs £100–£250 per window, with access equipment for upper floors sometimes extra. Older windows may have lead-based paint, so dry sanding should be avoided and appropriate precautions taken.
Dealing with rot
Wet rot in windows is caused by timber staying damp for long periods, usually where paint has failed or joints have opened. It is normally localised. Small areas can be repaired with a resin system, where decayed wood is cut back to sound timber, the remaining wood is consolidated and the void is filled with a durable resin filler that is shaped and painted.
Larger areas are better repaired by splicing, where the rotten section is cut out and a new piece of matching timber is glued and fixed in, then shaped to the original profile. Repairs typically start from around £150, primed ready for painting. If rot affects most of a sash or frame, replacement of that component may be more economical.
| Problem | Typical fix | Typical 2026 price |
|---|---|---|
| Failing paint, sound timber | Prepare and repaint | £100–£250 per window |
| Small area of rot | Resin repair | from £150 |
| Larger rot at cill or rail | Spliced timber repair | from £150, more for larger repairs |
| Sticking, draughty sashes | Full sash restoration | £400–£900 per window |
Sash cords, draughts and glass
On sash windows, cords wear and eventually snap. A sash with a broken cord will not stay up and is a safety risk. Renewing cords means removing beads and sashes, so it is often done as part of a wider overhaul, including easing, draught-proofing and redecoration, which typically costs £400–£900 per window.
Draught-proofing brush seals, fitted into grooves in the beads and meeting rails, greatly improve comfort without affecting how the window looks. Cracked panes should be replaced with suitable glass, and in England and Wales, glazing in critical locations such as low-level panes must meet the safety requirements of Approved Document K.
When to call a professional
Simple cleaning, lubrication and repainting of ground-floor windows are manageable for a capable DIYer. Rot repairs, sash cord replacement, draught-proofing and work on upper floors are better left to a specialist with the tools, materials and access equipment to do them properly and safely.
Landlords benefit from a planned maintenance cycle, with windows inspected and repainted on a regular schedule. It costs much less over time than waiting for rot to set in and replacing windows.
A specialist can also spot problems that are easy to miss, such as water getting in behind a cill from a failed mastic joint to the brickwork, decay hidden under sound-looking paint, or sashes that are out of balance because a weight has fallen inside the box. Addressing these early prevents much larger repairs later and keeps original windows working for many more years.
Questions people also ask
How often should timber windows be painted?
It depends on the paint system, exposure and orientation. Exposed south and west-facing and coastal windows need repainting more often than sheltered ones. Factory-finished windows come with a recommended maintenance interval. The key is to repaint before the paint film cracks or flakes, so water never reaches the timber.
Can rotten window frames be repaired?
Yes, in most cases. Localised rot at cills, bottom rails and joints can be repaired with a resin system or by splicing in new timber, typically from around £150. If rot is widespread through the frame or sash, replacing that component or the whole window may be more economical.
What paint should I use on timber windows?
Microporous exterior paints designed for joinery are widely used because they let moisture in the timber escape while keeping rain out. Linseed paints suit traditional and historic windows. Whatever you choose, use a compatible primer and follow the manufacturer's preparation and coat instructions.
Written and checked by the Timber Windows team. Read our editorial policy.
More guides
How Much Do Timber Windows Cost in the UK? 2026 Price Guide
A medium-sized double-glazed timber casement window typically costs £900–£1,800 supplied and fitted in the UK in 2026, and a timber box sash window…
Sash Window Restoration vs Replacement: Which Is Right for You?
Restore sash windows when the box frames are largely sound and you want to keep original character, typically for £400–£900 per window including new…
Timber Windows for Listed Buildings and Conservation Areas
Replacing windows on a listed building usually needs listed building consent, and doing the work without it is a criminal offence. Conservation areas…
Timber vs uPVC Windows: Cost, Lifespan and Looks Compared
uPVC windows usually cost less upfront and need little maintenance, but they cannot easily be repaired or repainted and rarely suit period homes.…
Get a free timber windows quote
Tell us what you need and we'll come back with a clear price.
Request a quote