Timber Windows

Guide · Homeowners · 4 min read · Updated 17 November 2026

Timber vs uPVC Windows: Cost, Lifespan and Looks Compared

Short answer

uPVC windows usually cost less upfront and need little maintenance, but they cannot easily be repaired or repainted and rarely suit period homes. Timber windows cost more, typically £900–£1,800 for a casement and £1,800–£3,500 for a box sash, but they look authentic, can be repaired and refinished, and are often required in conservation areas and on listed buildings. Well-maintained engineered timber windows can last many decades.

Timber vs uPVC Windows: Cost, Lifespan and Looks Compared

Appearance and character

The biggest difference most people notice is appearance. Timber windows can be made with the fine mouldings, slim glazing bars, putty-line profiles and proportions of traditional joinery, and painted in any colour. On Georgian, Victorian and Edwardian houses, and on cottages and barn conversions, timber windows look right in a way that is hard to match in uPVC.

uPVC windows have improved, with woodgrain foils, sculptured profiles and even mechanical joints that imitate timber. From a distance some are convincing, but frames are usually bulkier, and sliding sash imitations in uPVC often differ noticeably from traditional sashes. On modern houses, the difference matters less.

Details make a big difference to how a window looks. Traditional timber windows have putty-line glazing, where the glass sits close to the outer face of the frame, horns on sash windows and slender meeting rails. Many conservation officers and buyers notice these details immediately, and they are one reason period houses with good timber windows tend to look more cohesive than those with mixed replacement windows.

Cost over the life of the window

uPVC is cheaper to buy and install. Timber costs more upfront: a medium timber casement is typically £900–£1,800 fitted and a box sash £1,800–£3,500, with heritage sashes at £2,500–£5,000. Timber also needs repainting, at £100–£250 per window every few years depending on exposure and finish.

Over a long period, the gap can narrow. Timber windows can be repaired when parts decay, with rot repairs from £150, and repainted to look new. uPVC frames cannot easily be repaired if they crack, discolour or warp, and are usually replaced whole when they reach the end of their life.

FactorTimberuPVC
Upfront costHigherLower
Appearance on period homesAuthenticOften noticeably different
MaintenanceRepainting every few yearsCleaning only
RepairableYes, by splicing and resinLimited
Colour change laterYes, by repaintingDifficult
Listed buildings and many conservation areasOften requiredUsually refused

Lifespan and maintenance

Timber's reputation suffered from cheap softwood windows made in the 1970s and 1980s, which rotted quickly. Modern quality timber windows are made from engineered timber, laminated for stability, with better joint design and factory-applied microporous finishes that protect the wood far better. With regular maintenance, they can last many decades, and individual parts can be renewed.

uPVC needs only cleaning and occasional lubrication of hinges and locks. It does not rot, but it can become brittle, discolour in strong sunlight and move with temperature changes. When a uPVC frame fails, it is usually replaced rather than repaired.

Security and performance have improved for both materials. Modern timber windows can be fitted with multi-point locks, concealed hinges and laminated glass, and the best systems are tested to recognised security standards. The quality of the hardware and installation matters as much as the frame material when it comes to keeping a home secure.

  • Timber: repaint at the interval the finish manufacturer recommends.
  • Timber: inspect cills and bottom rails yearly for damage.
  • uPVC: wash frames and clean drainage slots.
  • Both: lubricate hinges, locks and stays.

Energy efficiency

Both materials can meet current Building Regulations. Timber is a natural insulator, and uPVC frames use internal chambers to reduce heat loss. In practice, the glazing and the quality of seals and installation affect performance more than the frame material. In England, all replacement windows must meet the energy efficiency requirements of Approved Document L, and installers registered with a competent person scheme such as FENSA or CERTASS can self-certify compliance.

Approved Document F also expects replacement windows not to make ventilation worse, so trickle vents or other background ventilation may be required with either material.

Environmental considerations

Timber is a renewable material when sourced from responsibly managed forests, and it stores carbon for as long as the window remains in use. Look for timber with chain-of-custody certification from recognised forest certification schemes. Because timber windows can be repaired and repainted rather than replaced, they can have a long service life.

uPVC is made from fossil fuel-based plastics. Recycling of old uPVC frames is increasing, but the material is not renewable. For owners who prioritise environmental impact, responsibly sourced timber is often the preferred choice.

Which to choose

Choose timber for listed buildings, properties in conservation areas where timber is required, period homes where authenticity matters, and if you want windows that can be repaired and repainted for decades. Choose uPVC if budget is the priority, the house is modern and you want minimal maintenance.

For those wanting low maintenance with a timber look inside, aluminium-clad timber windows are another option, with a weatherproof aluminium exterior and timber interior, though usually at a higher price. Whichever you choose, the quality of manufacture and installation matters more than the material alone.

It also helps to think about the whole house rather than one window at a time. Mixing materials and styles across an elevation rarely looks good, so if some windows are being replaced now and others later, choose a material and design you are happy to use throughout. A consistent set of windows is one of the simplest ways to keep a house looking well cared for.

Questions people also ask

Do timber windows last longer than uPVC?

Well-made, well-maintained engineered timber windows can last many decades, and individual parts can be repaired. uPVC windows also last many years but cannot easily be repaired when frames fail. The real lifespan of either depends on manufacturing quality, installation and maintenance.

Are timber windows harder to maintain than uPVC?

Yes, a little. Timber windows need repainting every few years depending on exposure and finish, typically £100–£250 per window, and an annual check for damage. uPVC needs only cleaning. Factory-finished timber windows have extended maintenance intervals compared with older site-painted windows.

Can I replace timber windows with uPVC?

Often yes on unlisted houses outside conservation areas, as long as the replacements meet Building Regulations. On listed buildings, listed building consent is needed and uPVC is very rarely accepted. In conservation areas with Article 4 directions, a planning application is needed and uPVC is often refused on front elevations.

Written and checked by the Timber Windows team. Read our editorial policy.

Get a free timber windows quote

Tell us what you need and we'll come back with a clear price.

Request a quote