Guide · Homeowners · 4 min read · Updated 17 November 2026
Sash Window Restoration vs Replacement: Which Is Right for You?
Short answer
Restore sash windows when the box frames are largely sound and you want to keep original character, typically for £400–£900 per window including new cords, rot repairs and draught-proofing. Replace them when the frames are badly rotted, previous repairs have failed, or you want double glazing. New double-glazed timber box sashes cost £1,800–£3,500, and heritage sashes with slim or vacuum glazing £2,500–£5,000.
What sash restoration involves
A full sash restoration, sometimes called an overhaul, starts with removing the staff beads and parting beads so the sashes can be taken out. Old cords are cut away and the weights checked. Rot in the sashes, cills and box frame is cut out and repaired with spliced timber or resin. Sashes are eased so they slide freely, and old paint build-up that makes them stick is removed.
Draught-proofing is then fitted, usually brush seals in grooves routed into the beads and meeting rails, so the sashes seal when closed but still slide. New cords are fitted and the weights rebalanced, the beads are refitted and the window is redecorated. Done well, it transforms a rattling, draughty window that will not open into one that slides smoothly and keeps out most draughts.
Most restorers work on one or two windows at a time, so rooms are not left open for long. A typical overhaul takes around a day per window, depending on how much rot repair is needed and how many layers of old paint have to be removed before the sashes slide properly. Where old paint may contain lead, it should be removed with methods that avoid dry sanding and dust.
- Remove beads and sashes.
- Renew sash cords and check weights.
- Repair rot with spliced timber or resin.
- Ease sashes and remove excess paint.
- Fit brush draught-proofing.
- Refit, rebalance and redecorate.
When restoration makes sense
Restoration is usually right when the box frames are mostly sound and the rot is localised, typically at the cill and bottom rails. Original sashes in older houses were often made from slow-grown timber that is denser and more durable than much modern softwood, and many have survived well over a century. Keeping them preserves the character, old glass and proportions of a period house.
It is also the natural choice on listed buildings, where replacing original windows usually needs listed building consent and may be refused. Restoration costs far less than new heritage sashes, and combined with secondary glazing it can greatly improve comfort without altering the appearance of the building from outside.
When replacement is the better option
Replacement makes more sense when the box frame itself is badly decayed, with soft timber through the pulley stiles, linings or cill, or when previous repairs have failed and the window has been patched repeatedly. It is also the choice when you want double glazing in the sashes themselves and the existing sashes are too slender to take it.
New timber box sashes can be made to match the originals closely, with the same proportions and mouldings, but with double glazing, factory finishes and modern draught-sealing built in. Heritage designs with slim or vacuum glazing keep thin glazing bars that look much more like the original single-glazed sashes than standard double glazing does.
A careful joiner will often suggest a middle path: keeping the original box frame where it is sound and making new sashes to fit it. This preserves the frame, linings and architraves inside the room, avoids disturbing plaster and decoration, and allows the new sashes to be made deep enough for slim double glazing where consent allows. It usually costs less than a complete new window and keeps more of the original fabric.
Cost and performance compared
The table compares restoration and replacement on the points owners usually weigh up. Prices are typical UK guide prices for 2026 per medium-sized window.
| Factor | Restoration | New double-glazed sash | Heritage slim or vacuum sash |
|---|---|---|---|
| Typical price | £400–£900 | £1,800–£3,500 | £2,500–£5,000 |
| Keeps original timber and glass | Yes | No | No |
| Draughts | Greatly reduced | Very low | Very low |
| Heat loss through glass | Unchanged unless secondary glazing added | Much reduced | Much reduced |
| Listed building consent | Not usually for like-for-like repair | Usually needed | Usually needed |
Energy efficiency and secondary glazing
A large part of the heat lost through old sash windows is due to draughts rather than the single glass itself, so draught-proofing during restoration makes a big difference to how warm a room feels. The single glazing still loses more heat than double glazing, however, and condensation on cold glass may continue in some rooms.
Secondary glazing, a separate slim glazed panel fitted inside the window reveal, can reduce heat loss and noise substantially while leaving the original sashes untouched. It is often acceptable on listed buildings because it is reversible. Combined with restoration, it can achieve comfort close to that of new double-glazed windows at a lower cost and with the original windows preserved.
Rules for listed buildings and conservation areas
Listed building consent is required for works that affect the character of a listed building, which usually includes replacing windows. Carrying out such work without consent is a criminal offence. Like-for-like repair generally does not need consent, but replacing sashes, changing glazing or altering glazing bars may, so check with the council's conservation officer first.
In conservation areas, councils may control window replacement through Article 4 directions, particularly on front elevations. Where replacement is allowed, it may need to be in timber to a matching design. In England, replacement windows must also meet the energy efficiency requirements of Approved Document L, which a competent person scheme installer can self-certify.
Questions people also ask
How long does sash window restoration last?
A well-executed restoration with good rot repairs, draught-proofing and proper redecoration can keep sash windows working for many decades, provided they are repainted regularly. Cords may need renewing occasionally, and paint should be maintained so water cannot reach the timber.
Can I put double glazing in my existing sash windows?
Sometimes. Slim double glazing or vacuum glazing can occasionally be fitted into existing sashes if they are deep enough, often with the weights rebalanced for the heavier glass. Many original sashes are too slender. On listed buildings, changing glazing usually needs consent, and secondary glazing is often preferred.
Is sash restoration messy?
There is some dust from cutting out rot and preparing paintwork, and sashes are removed for a period. A good restorer protects floors and furniture, uses dust extraction and removes lead-containing paint safely where present. Most windows are back in place the same day or the next.
Written and checked by the Timber Windows team. Read our editorial policy.
More guides
How Much Do Timber Windows Cost in the UK? 2026 Price Guide
A medium-sized double-glazed timber casement window typically costs £900–£1,800 supplied and fitted in the UK in 2026, and a timber box sash window…
Timber Windows for Listed Buildings and Conservation Areas
Replacing windows on a listed building usually needs listed building consent, and doing the work without it is a criminal offence. Conservation areas…
Timber vs uPVC Windows: Cost, Lifespan and Looks Compared
uPVC windows usually cost less upfront and need little maintenance, but they cannot easily be repaired or repainted and rarely suit period homes.…
How to Maintain Timber Windows: Painting, Rot Repair and Care
To maintain timber windows, check them every year for cracked paint, soft timber and failed putty, especially at cills and bottom rails. Wash frames,…
Get a free timber windows quote
Tell us what you need and we'll come back with a clear price.
Request a quote